FORD 6.0L 48V FUEL INJECTION CONTROL MODULE “FICM”

Description

FICM Failures
 The Fuel Injection Control Module (FICM) controls the fuel injectors on the 6.0L Power Stroke engine. It is responsible for stepping up the battery voltage to 48 volts, which is required to activate the injectors. The FICM works in conjunction with the Powertrain Control Module (PCM) to control the fuel delivery to the engine. The module is located on the engines valve cover, and is subjected to extreme heat and vibration which is the most probable cause of the FICM’s high failure rate. A failed FICM will cause stalling or a no-start condition.

If your FICM voltage is low, then you should see a DTC P0611 (Fuel Injector Control Module Performance).

Pre-Programmed and Ready to Install!
OEM replacement modules are expensive, and they come un-programmed and must be programmed by the Dealer prior to vehicle operation, which is a difficult and costly task for most independent repair facilities. Our professionally remanufactured FICM’s are 100% torn down, upgraded and fully tested on a vehicle simulator. Once each unit passes initial testing, they are pre-programmed with the appropriate vehicle software and are ready for installation and operation. All you have to do is install it and drive it away! If you have any questions about what ficm your truck will take please call us at (866) 330-0183

Fitment
This 921-124 FICM Fits 2005-2007 F-Series Super Duty And Excursion Built After 1/01/05
For F-Series Super Duty’s and Excursions Built Prior to 2005 See FICM Part Numbers 921-123 And 921-122

There is a additional $300.00 FICM core charge that will be ran on your credit card and credited once we receive your core within 30 Days, If Not Returned in 30 Days NO Credit will be given.