TS Performance Customized 6 Position Chip

Description

Plug in more power. The TS Performance Six Position Chip offers more power at the rear wheels than any other chip or downloader on the market. You can adjust between the 6 settings while driving by simply turning a knob mounted on the dash. No need to pull over and download a different setting while the competition passes you by.

We have mulitple tunes available for the 6 position settings. Your choice of programs are Stock, High Idle, Valet, Anti-Theft, 50hp, 75hp, 100hp, 140+ Extreme. We also have tune’s available for Firm Shift options and Single Shot Injector programming.

Read Before Ordering:
In order for us get you the proper tunes for your truck we will need the 4 Digit Calibration Code on the PCM. Which is located on the side of the PCM connector facing the driver’s fender, there is a white sticker that contains the Part Number and Calibration information. The Part Number is easy to identify because it will always contain ”-12A650-” in the middle of it. The Calibration code (also called the ”Box” code or ”Tear Tag” code) is a 4 digit code that is composed of 3 letters and 1 number. (SEE BELOW)

PLEASE INCLUDE THE 4 DIGIT CALIBRATION CODE IN THE COMMENTS SECTION ON YOUR ORDER.
Our feel free to call your Sales Department with any Tuning Questions you have @ 1-866-330-0183

If you are installing the chip in an Excursion with PATS factory anti theft system, this chip will disable the PATS system.
-To eliminate the ”THEFT” light, you must disconnect the red connector from the PATS module.
-The PATS module is located below the dash directly above the transmission hump in the floor.
-With the PATS disabled, any key that turns the injection will start the engine. In other words, a non-chip key will start the vehicle